product categories
-
- Sockets are used to attach steel wire rope to a fixed point to which the socket is to be connected. This can be as an anchoring system for tubes or pipes, anchor wires of dredging material, anchor cables of oil platforms, towing cables or for fastening cables in construction purposes such as bridges, roof construction etc.
- Sockets are designed for in-line use only.
- Sockets are the strongest steel wire rope and fittings available. If they are assembled in the proper way the meet or exceed the breaking strength of the steel wire rope.
-
- Sockets are used to attach steel wire rope to a fixed point to which the socket is to be connected. This can be as an anchoring system for tubes or pipes, anchor wires of dredging material, anchor cables of oil platforms, towing cables or for fastening cables in construction purposes such as bridges, roof construction etc.
- Sockets are designed for in-line use only.
- Sockets are the strongest steel wire rope and fittings available. If they are assembled in the proper way the meet or exceed the breaking strength of the steel wire rope.
-
- Sockets are used to attach steel wire rope to a fixed point to which the socket is to be connected. This can be as an anchoring system for tubes or pipes, anchor wires of dredging material, anchor cables of oil platforms, towing cables or for fastening cables in construction purposes such as bridges, roof construction etc.
- Sockets are designed for in-line use only.
- Sockets are the strongest steel wire rope and fittings available. If they are assembled in the proper way the meet or exceed the breaking strength of the steel wire rope.
-
The end of a single wire rope is bent back along the rope to form the eye, and strands are hand-tucked into the body of the rope in what is called. This splice is tapered and concealed by tucking strand ends into the rope, making a sling that is easily pulled through narrow spaces; there are no rough ends to snag hands. -
- Helideck landing net is designed for use in high risky landing zones where it is essential to prevent helicopters skidding whilst landing, such as roof top helipads, ships, leisure yachts, and offshore oil rigs where skidding is a greater risk due to the danger of oil deposits being present on the landing platform
- Our team of experienced technicians expertly manufacture the net by hand to the client specification using a low profile Knowless design, with only the finest material to withstand the most severe offshore weather conditions and ultra violet radiation. All helideck landing nets go through a strick quality control process to ensure that every weave is correct before it is delivered to the end of user.
-
A turnbuckle is a piece of hardware used to eliminate slack and adjust tension in a rope, cable, or other tensioning system -
HLC clamp is use for horizontal lifting and transfer of steel plates and is partic-ularly suited to this application due to the special thin ground plate and buffer cams which facilitate easy insertion and removal under the plate being lifted. It can also be used hanging vertically under a spreader. These clamps are light in weight relative to their lifting capacity. Please note that the WLL of these clamps is given based on a pair. The clamps are suitable for surface hard-nesses up to 37 RC. -
It has an equal lay construction and achieves a superior breaking load. The construction has been designed to give a flexible rope with a good fatigue life. A wire rope is used for a wide range of applications, examples of which are shown below:- Wire rope slings
- General engineering applications
- Crane ropes
- Hoist rope
- Winch ropes
- Holding and closing ropes for grab cranes
- Tow ropes
- Luffing ropes
- Pursing wires
- Mooring ropes
- Lifeboat falls
- Wire rope rigging applications
-
A turnbuckle is a piece of hardware used to eliminate slack and adjust tension in a rope, cable, or other tensioning system -
- Standard: BS EN 13157
- WLL < 5ton, 100% load tested to 1.5 x WLL
- WLL >= 10ton, 100% load tested to 1.25 x WLL
- Safety factor 4:1
- Grade 80 alloy load chain Iso and Jis standard.
- Forged and Heat Treated load Hooks with batch trace ability and stretch indicators.
-
A hard natural fibre, manila is especially resistant to sunlight. Manila holds knots firmly and stretches very little. Chemicals will cause manila rope to deteriorate. They suit the demands of decking, shipping, construction and agriculture. Origin: Philippine Cert: CO, Mill Cert -
- Designed for use with chain or wire rope.
- Mekongsling specialize in supplying masterlink and masterlink assembly for fabricate wire rope slings and single and multi leg chain slings as well.
- Well suited for use with chain, wire rope, and synthetic slings.
- The products are cast from alloy steel, with high load capacity and safe for using.
- Inspection should take place at least every six months and more frequendly when the links are used in severe operating conditions.